How to Troubleshoot Problems With Your Opener

Your garage door functions because of your garage door opener. This is where the motor is located. It is what allow the door to open and close. If you start to have trouble with your garage door, this could be the reason. However there could be a host of other reasons but at Garage Door Repair Applewood in Applewood, Colorado, we believe this is a good place to start. We often find this to be the problem once someone starts having trouble with the functioning of their garage door. Your opener is both an electrical and mechanical part. Some of the parts of your garage door do become old an inoperable and will need replacing. There are some parts that might be cheaply made and will no longer work. This is why you should troubleshoot, to find out what the problem is. We believe that it’s important for you to know what the problem might be and identify the problem if you can.

Your Springs

Your garage door has springs on both sides of it. When you have weak springs or if they are not correctly installed, this could pose a problem for you. If you’re springs are worn, they cause other parts of your garage do have to work harder. Unfortunately, this is often the motor, which is inside your opener. Evaluate the springs to make sure that they are in good condition. If they are not, you can be sure that you’ll begin to have problems with your opener if you do not.

Check the Remote

If you have a remote that isn’t working, this will not allow your garage door opener to work. If the lights are not coming on when you hit the power button on the remote, chances are that you need to replace your batteries. If the light on the remote comes on but the door still won’t open, you can do a test. After you have replaced the batteries in the remote, you can check your wall unit. You can manually check the door by trying to lift it. If this isn’t the problem, you may need to simply have the remote reprogrammed. These are some of the easiest things that you can do that will not pose a threat to your safety. If you still have trouble with your garage door, you should contact a local locksmith.

Evaluate the Sensors

If there is something blocking your door sensors, this will not enable your doors to open. Since the sensors are so close to the floor, it’s reasonable to conclude that they will get dirty from time to time. They may also become misaligned. If the door works sometimes but won’t work at others, this could be the reason. Look around the sensors to see if anything is blocking either of them. It could be something as small as a trash bin blocking them. It can also be dirt on the lens that needs to be whipped clean. You can do this on your own by taking a soft cloth and gentle detergent. You will also need to whip the lens very carefully to avoid scratching the lens. After cleaning the lens, you should try again to see if the door opens or not.

The other problem might be the tracks. If your tracks are misaligned, you should have them realigned. This can be a problem that should be taken care of by a skilled technician. Once the tracks are realigned, it might help with the doors opener.

Check Breaker Box

Many of the customers we service do not check their breaker box. However, if the breaker is burnt out, this could be the problem. The problem may not be inside your garage at all but might be due to a problem with your power. Check to see if the breaker to your garage is working properly. Finding the breaker that is connects to your garage isn’t always that easy to find. It is usually mid-way down, near the on and off switches. Unfortunately, not every breaker box has a label. Therefore, the information presented here might be helpful. Turn it back on after turning it off and then recheck your wall unit remote and the hand remote to make sure they are still working. If all is good, try using your garage again.

The above are the easiest things to resolve. However, if these things aren’t working, perhaps it’s time to give a garage door expert a call to further evaluate the situation. You can be of assistance to the expert. Open and close the garage door and let them know exactly what you are hearing or seeing when you do this. If you have tried to open and close the door and yet nothing is happening, this is a clear indication that something is definitely wrong with the garage door opener. What you need to realize is that the garage door opener will not always work. It has a life cycle. However, if it hasn’t reached its life cycle yet, there is a good chance that the problem can be resolved. If it acts like it wants to open but it won’t, this means that something might need adjusting.

As we stated in the beginning of our article, we mentioned that your garage door opener has moving parts; this means there are more chances for your opener to stop functioning. If you have a newer model home, you likely have an automatic garage door opener. An automatic garage door opener has many benefits. If you are experiencing problems with your garage door opener, we already know how much of a headache this can be for you. It is important that you try to resolve the problem as quickly as possible. This means you’ll need to get on top of things by troubleshooting it on your own. You just might find what you need to get your door working again.